Approach to Circular Chemistry Preparing New Polyesters from Olive Oil.

The transformation of cooking oils and their waste into polyesters is a challenge for circular chemistry. Herein, we have used epoxidized olive oil (EOO), obtained from cooking olive oil (COO), and various cyclic anhydrides (such as phthalic anhydride PA, maleic anhydride MA, and succinic anhydride SA) as raw materials for the preparation of new bio-based polyesters. For the synthesis of these materials, we have used the bis(guanidine) organocatalyst 1 and tetrabutylammonium iodide (Bu4NI) as cocatalyst. The optimal reaction conditions for the preparation of poly(EOO-co-PA) and poly(EOO-co-MA) were 80 °C for 5 h using toluene as solvent; however, the synthesis of poly(EOO-co-SA) required more extreme reaction conditions. Furthermore, we have exclusively succeeded in obtaining the trans isomer for MA-polyester. The obtained biopolyesters were characterized by NMR, Fourier transform infrared, thermogravimetric analysis, and scanning electron microscopy analyses. Since there are few examples of functionalized and defined compounds based on olive oil, it is innovative and challenging to transform these natural-based compounds into products with high added value.

Combining Materials Obtained by 3D-Printing and Electrospinning from Commercial Polylactide Filament to Produce Biocompatible Composites.

The design of scaffolds to reach similar three-dimensional structures mimicking the natural and fibrous environment of some cells is a challenge for tissue engineering, and 3D-printing and electrospinning highlights from other techniques in the production of scaffolds. The former is a well-known additive manufacturing technique devoted to the production of custom-made structures with mechanical properties similar to tissues and bones found in the human body, but lacks the resolution to produce small and interconnected structures. The latter is a well-studied technique to produce materials possessing a fibrillar structure, having the advantage of producing materials with tuned composition compared with a 3D-print. Taking the advantage that commercial 3D-printers work with polylactide (PLA) based filaments, a biocompatible and biodegradable polymer, in this work we produce PLA-based composites by blending materials obtained by 3D-printing and electrospinning. Porous PLA fibers have been obtained by the electrospinning of recovered PLA from 3D-printer filaments, tuning the mechanical properties by blending PLA with small amounts of polyethylene glycol and hydroxyapatite. A composite has been obtained by blending two layers of 3D-printed pieces with a central mat of PLA fibers. The composite presented a reduced storage modulus as compared with a single 3D-print piece and possessing similar mechanical properties to bone tissues. Furthermore, the biocompatibility of the composites is assessed by a simulated body fluid assay and by culturing composites with 3T3 fibroblasts. We observed that all these composites induce the growing and attaching of fibroblast over the surface of a 3D-printed layer and in the fibrous layer, showing the potential of commercial 3D-printers and filaments to produce scaffolds to be used in bone tissue engineering.

Concentration Dependent Single Chain Properties of Poly(sodium 4-styrenesulfonate) Subjected to Aromatic Interactions with Chlorpheniramine Maleate Studied by Diafiltration and Synchrotron-SAXS.

The polyelectrolyte poly(sodium 4-styrenesulfonate) undergoes aromatic-aromatic interaction with the drug chlorpheniramine, which acts as an aromatic counterion. In this work, we show that an increase in the concentration in the dilute and semidilute regimes of a complex polyelectrolyte/drug 2:1 produces the increasing confinement of the drug in hydrophobic domains, with implications in single chain thermodynamic behavior. Diafiltration analysis at polymer concentrations between 0.5 and 2.5 mM show an increase in the fraction of the aromatic counterion irreversibly bound to the polyelectrolyte, as well as a decrease in the electrostatic reversible interaction forces with the remaining fraction of drug molecules as the total concentration of the system increases. Synchrotron-SAXS results performed in the semidilute regimes show a fractal chain conformation pattern with a fractal dimension of 1.7, similar to uncharged polymers. Interestingly, static and fractal correlation lengths increase with increasing complex concentration, due to the increase in the amount of the confined drug. Nanoprecipitates are found in the range of 30-40 mM, and macroprecipitates are found at a higher system concentration. A model of molecular complexation between the two species is proposed as the total concentration increases, which involves ion pair formation and aggregation, producing increasingly confined aromatic counterions in hydrophobic domains, as well as a decreasing number of charged polymer segments at the hydrophobic/hydrophilic interphase. All of these features are of pivotal importance to the general knowledge of polyelectrolytes, with implications both in fundamental knowledge and potential technological applications considering aromatic-aromatic binding between aromatic polyelectrolytes and aromatic counterions, such as in the production of pharmaceutical formulations.

Dietary patterns in Mexican preschool children are associated with stunting and overweight.

OBJECTIVE: To evaluate the association between dietary patterns, stunting, and overweight among Mexican preschoolers. METHODS: This study was conducted with anthropometric (weight, height/length), sociodemographic (age, gender, education level of household head, socioeconomic status, country region and area, ethnicity, and beneficiary of social programs), and dietary data (Semiquantitative-food frequency questionnaire) on children aged from 1 to 4 years collected from the Mexican National Health and Nutrition Survey-2012. Dietary patterns were derived by principal components analysis. The association between dietary patterns, stunting, and overweight was assessed by prevalence ratios (PR), estimated by Poisson regression. RESULTS: In total, 1,112 preschoolers (mean age 3.06 years, SD = 1.08 years; 48.8% females) were included in the study; 11.9% of whom presented stunting, and 6.7% overweight. We identified four dietary patterns: Fruits and Vegetables [F&V], Western [W], Traditional [T], and Milk and Liquids [M&L]. Considering the lowest tertile of each dietary pattern as reference, the prevalence of stunting was 2.04 times higher [95%CI: 1.17-3.56] among children in the highest tertile of the "F&V" pattern. The prevalence of stunting was lower among children in the highest tertile of the "W" pattern [PR = 0.48; 95%CI: 0.27-0.85]. Overweight was negatively associated with the "F&V" dietary pattern [PR = 0.37; 95%CI: 0.16-0.85 for its highest tertile], and children whose consumption was mostly equivalent to the "T" pattern showed higher prevalence of stunting [PR = 1.74; 95%CI: 1.01-3.00]. CONCLUSIONS: The prevalence of stunting and overweight in a nationwide sample of Mexican preschoolers was associated with dietary patterns.

Vitamin D status in Mexican children 1 to 11 years of age: an update from the Ensanut 2018-19 / Estado de vitamina D en niños mexicanos de 1 a 11 años de edad: una actualización de la Ensanut 2018-19

Abstract Objective: To evaluate vitamin D status and deficiency in Mexican children and related factors, with updated data from a representative national survey. Materials and methods: Data and serum samples of child participants were collected in the Ensanut 2018-19. The measurement 25-(OH)-D was obtained through chemiluminescence. Height and weight, as well as dietary information, were measured using a semi-quan- titative food frequency questionnaire and sociodemographic information. Results: Data of 4 691 children aged 1-11 years were analyzed. Vitamin D deficiency (25-OH-D70% of vitamin D intake. Conclusions: Vitamin D deficiency is important in Mexican children. Actions and programs to fight this deficiency are required.

Resumen Objetivo: Evaluar el estado y la deficiencia de vitamina D en niños mexicanos, así como los factores relacionados, con datos actualizados de una encuesta nacional representativa. Material y métodos: Los datos y muestras de suero de niños participantes se recolectaron en la Ensanut 2018-19. La medición de 25- (OH)- D se realizó mediante quimiolu- miniscencia. Se obtuvo estatura, peso e información dietética a través de un cuestionario semicuantitativo de frecuencia alimentaria e información sociodemográfica. Resultados: Se analizaron datos de 4 691 niños entre 1 y 11 años. Se observó deficiencia de vitamina D (25-OH-D 70% de la ingesta. Conclusiones: La deficiencia de vitamina D es considerable en los niños mexicanos. Se requieren acciones y programas para combatirla.

Vitamin D status in Mexican children 1 to 11 years of age: an update from the Ensanut 2018-19.

OBJECTIVE: To evaluate vitamin D status and deficiency in Mexican children and related factors, with updated data from a representative national survey. MATERIALS AND METHODS: Data and serum samples of child participants were collected in the Ensanut 2018-19. The measurement 25-(OH)-D was obtained through chemiluminescence. Height and weight, as well as dietary information, were measured using a semi-quan-titative food frequency questionnaire and sociodemographic information. RESULTS: Data of 4 691 children aged 1-11 years were analyzed. Vitamin D deficiency (25-OH-D<50 nmol/L) was found in 27.3% of pre-school-age children and 17.2% of school-age children, and was positively associated with the body mass index (BMI). Main dietary sources were milk, eggs and dairy products, which in combination provided >70% of vitamin D intake. CONCLUSIONS: Vitamin D deficiency is important in Mexican children. Actions and programs to fight this deficiency are required.

Self-Healing Polymer Nanocomposite Materials by Joule Effect.

Nowadays, the self-healing approach in materials science mainly relies on functionalized polymers used as matrices in nanocomposites. Through different physicochemical pathways and stimuli, these materials can undergo self-repairing mechanisms that represent a great advantage to prolonging materials service-life, thus avoiding early disposal. Particularly, the use of the Joule effect as an external stimulus for self-healing in conductive nanocomposites is under-reported in the literature. However, it is of particular importance because it incorporates nanofillers with tunable features thus producing multifunctional materials. The aim of this review is the comprehensive analysis of conductive polymer nanocomposites presenting reversible dynamic bonds and their energetical activation to perform self-healing through the Joule effect.

Dietary patterns in Mexican preschool children are associated with stunting and overweight

ABSTRACT OBJECTIVE To evaluate the association between dietary patterns, stunting, and overweight among Mexican preschoolers. METHODS This study was conducted with anthropometric (weight, height/length), sociodemographic (age, gender, education level of household head, socioeconomic status, country region and area, ethnicity, and beneficiary of social programs), and dietary data (Semiquantitative-food frequency questionnaire) on children aged from 1 to 4 years collected from the Mexican National Health and Nutrition Survey-2012. Dietary patterns were derived by principal components analysis. The association between dietary patterns, stunting, and overweight was assessed by prevalence ratios (PR), estimated by Poisson regression. RESULTS In total, 1,112 preschoolers (mean age 3.06 years, SD = 1.08 years; 48.8% females) were included in the study; 11.9% of whom presented stunting, and 6.7% overweight. We identified four dietary patterns: Fruits and Vegetables [F&V], Western [W], Traditional [T], and Milk and Liquids [M&L]. Considering the lowest tertile of each dietary pattern as reference, the prevalence of stunting was 2.04 times higher [95%CI: 1.17-3.56] among children in the highest tertile of the "F&V" pattern. The prevalence of stunting was lower among children in the highest tertile of the "W" pattern [PR = 0.48; 95%CI: 0.27-0.85]. Overweight was negatively associated with the "F&V" dietary pattern [PR = 0.37; 95%CI: 0.16-0.85 for its highest tertile], and children whose consumption was mostly equivalent to the "T" pattern showed higher prevalence of stunting [PR = 1.74; 95%CI: 1.01-3.00]. CONCLUSIONS The prevalence of stunting and overweight in a nationwide sample of Mexican preschoolers was associated with dietary patterns.

pH-Responsive Polyketone/5,10,15,20-Tetrakis-(Sulfonatophenyl)Porphyrin Supramolecular Submicron Colloidal Structures.

In this work, we prepared color-changing colloids by using the electrostatic self-assembly approach. The supramolecular structures are composed of a pH-responsive polymeric surfactant and the water-soluble porphyrin 5,10,15,20-tetrakis-(sulfonatophenyl)porphyrin (TPPS). The pH-responsive surfactant polymer was achieved by the chemical modification of an alternating aliphatic polyketone (PK) via the Paal-Knorr reaction with N-(2-hydroxyethyl)ethylenediamine (HEDA). The resulting polymer/dye supramolecular systems form colloids at the submicron level displaying negative zeta potential at neutral and basic pH, and, at acidic pH, flocculation is observed. Remarkably, the colloids showed a gradual color change from green to pinky-red due to the protonation/deprotonation process of TPPS from pH 2 to pH 12, revealing different aggregation behavior.

Biodentine Induce Proteínas Apoptóticas Caspasa 3 y PARP-1 en Células de la Pulpa Dental Humana / Biodentine Induces Apoptotic Proteins Caspase 3 and PARP - 1 on Human Dental Pulp Cells

RESUMEN: Las patologías pulpares han sido un verdadero reto para la odontología principalmente por su tratamiento. Actualmente, existen numerosos biomateriales en el mercado que reportan tener propiedades inherentes en los tejidos dentarios. Sin embargo, diferentes estudios sobre múltiples líneas celulares expuestas a estos biomateriales demuestran resultados controversiales como biocompatiblidad y citotoxicidad celular. Biodentine, es un cemento endodóntico en base a silicatos cálcico de múltiples aplicaciones, que prestaría propiedades de biocompatibilidad como bioactividad celular, características que le permitirían incluso ser utilizado en contacto directo con la pulpa dental. El objetivo de este estudio es la evaluación in-vitro de Biodentine, sobre cultivos de células de la pulpa dental humana (CCPDH). Se prepararon discos de cemento de Biodentine™ de 2 x 6 mm, los que se expusieron a cultivos de células aisladas de la pulpa dental humana. Luego de 24, 48 y 72 horas de exposición, se realizaron ensayos de viabilidad celular utilizando el método colorimétrico MTT. También se realizaron ensayos de expresión proteica de dos proteínas involucradas en la vía de señalización de la apoptosis celular: Caspasa - 3 clivada y Poli (ADP-Ribosa) Polimerasa, PARP - 1. Existen diferencias estadísticamente significativas (p<0,05) en los ensayos de viabilidad celular entre las células expuestas a Biodentine y el grupo control, como también a medida que aumenta el tiempo de exposición (p<0,05). Por otra parte, también existen diferencias significativas (p<0,05) en la expresión de PARP- 1 en los grupos sometidos a Biodentine. Los resultados obtenidos en este estudio demuestran que Biodentine genera citotoxicidad celular en cultivos celulares de pulpa dental humana, por disminución de la viabilidad celular como por la expresión de proteínas apoptóticas. Es por esto que la utilización de este biomaterial debería ser estudiado y considerarse en cada caso clínico, especialmente como recubridor pulpar directo.

ABSTRACT: Oral pathologies have been a real challenge for dentistry, mainly due to its treatment. Currently, there are numerous biomaterials on the market that may present inherent properties in dental tissues. However, studies on multiple cell lines are based on biocompatible results such as biocompatibility and cellular cytotoxicity. Biodentine is endodontic cement based on calcium silicates of multiple applications, which would provide biocompatibility properties as cellular bioactivity, characteristics that will allow it to be used in direct contact with the dental pulp. The objective of this study is the in vitro evaluation of Biodentine, on cultures of cells of the human dental pulp (HDPC). Biodentine cement disks of 2 x 6 mm were prepared, and HDPC culture plates were introduced. After 24, 48 and 72 hours of exposure, cell viability tests were performed using the MTT colorimetric method. On the other hand, protein expression assays of two proteins involved in the signaling pathway of cell apoptosis Caspase-3 cleaved (cas-3 clv) and PARP-1 are carried out. There are statistically significant differences (p <0,05) in the cell viability tests between Biodentine and control group, as well as the exposure time increases (p <0,05). Otherwise, there are also significant differences (p <0,05) in the expression of PARP-1 in the groups, sometimes a Biodentine. The results in this study that Biodentine generates a cellular cytotoxicity in HDPC cultures, therefore, cell viability as the expression of apoptotic proteins. This is why the use of this biomaterial should be studied for each particular clinical case, especially as a direct pulp capping agent.

Fibrous Materials Made of Poly(ε-caprolactone)/Poly(ethylene oxide)-b-Poly(ε-caprolactone) Blends Support Neural Stem Cells Differentiation.

In this work, we design and produce micron-sized fiber mats by blending poly(ε-caprolactone) (PCL) with small amounts of block copolymers poly(ethylene oxide)m-block-poly(ε-caprolactone)n (PEOm-b-PCLn) using electrospinning. Three different PEOm-b-PCLn block copolymers, with different molecular weights of PEO and PCL, were synthesized by ring opening polymerization of ε-caprolactone using PEO as initiator and stannous octoate as catalyst. The polymer blends were prepared by homogenous solvent mixing using dichloromethane for further electrospinning procedures. After electrospinning, it was found that the addition to PCL of the different block copolymers produced micron-fibers with smaller width, equal or higher hydrophilicity, lower Young modulus, and rougher surfaces, as compared with micron-fibers obtained only with PCL. Neural stem progenitor cells (NSPC), isolated from rat brains and grown as neurospheres, were cultured on the fibrous materials. Immunofluorescence assays showed that the NSPC are able to survive and even differentiate into astrocytes and neurons on the synthetic fibrous materials without any growth factor and using the fibers as guidance. Disassembling of the cells from the NSPC and acquisition of cell specific molecular markers and morphology progressed faster in the presence of the block copolymers, which suggests the role of the hydrophilic character and porous topology of the fiber mats.

A mechanistic approach for the optimization of loperamide loaded nanocarriers characterization: Diafiltration and mathematical modeling advantages.

Oral bioavailability of loperamide is restricted by its limited absorption in the gastrointestinal tract due to its poor aqueous solubility and its P-glycoprotein (Pgp) substrate characteristic. In addition, ammonium methacrylate copolymers have shown to have mucoadhesive properties, whereas poloxamer 188, has been suggested as a Pgp inhibitor. Thus, in this work, we evaluate conditions that affect physicochemical parameters of ammonium methacrylate/poloxamer 188-based nanocarriers loaded with loperamide hydrochloride. Nanocarriers were synthesized by nanoprecipitation, enhancing loperamide encapsulation efficiency by modifying the aqueous phase to basic pH. The isolation of the non-encapsulated drug fraction from the nanocarriers-incorporated fraction was conducted by centrifugation, ultrafiltration, vacuum filtration and diafiltration. The last method was effective in providing a deeper understanding of drug-nanocarrier loading and interactions by means of modeling the data obtained by it. Through diafiltration, it was determined an encapsulation efficiency of about 93%, from which a 38% ±6 was shown to be reversibly (thermodynamic interaction) and a 62% ±6 irreversibly (kinetic interaction) bound. Finally, release profiles were assessed through empirical and semi-empirical modeling, showing a biphasic release behavior (burst effect 11.34% and total release at 6 h = 33% ±1). Thus, encapsulation efficiency and release profile were shown to have a strong mathematical modeling-based correlation, providing the mechanistic approach presented in this article a solid support for future translational investigations.

Aggregation Number in Water/n-Hexanol Molecular Clusters Formed in Cyclohexane at Different Water/n-Hexanol/Cyclohexane Compositions Calculated by Titration 1H NMR.

Upon titration of n-hexanol/cyclohexane mixtures of different molar compositions with water, water/n-hexanol clusters are formed in cyclohexane. Here, we develop a new method to estimate the water and n-hexanol aggregation numbers in the clusters that combines integration analysis in one-dimensional 1H NMR spectra, diffusion coefficients calculated by diffusion-ordered NMR spectroscopy, and further application of the Stokes-Einstein equation to calculate the hydrodynamic volume of the clusters. Aggregation numbers of 5-15 molecules of n-hexanol per cluster in the absence of water were observed in the whole range of n-hexanol/cyclohexane molar fractions studied. After saturation with water, aggregation numbers of 6-13 n-hexanol and 0.5-5 water molecules per cluster were found. O-H and O-O atom distances related to hydrogen bonds between donor/acceptor molecules were theoretically calculated using density functional theory. The results show that at low n-hexanol molar fractions, where a robust hydrogen-bond network is held between n-hexanol molecules, addition of water makes the intermolecular O-O atom distance shorter, reinforcing molecular association in the clusters, whereas at high n-hexanol molar fractions, where dipole-dipole interactions dominate, addition of water makes the intermolecular O-O atom distance longer, weakening the cluster structure. This correlates with experimental NMR results, which show an increase in the size and aggregation number in the clusters upon addition of water at low n-hexanol molar fractions, and a decrease of these magnitudes at high n-hexanol molar fractions. In addition, water produces an increase in the proton exchange rate between donor/acceptor molecules at all n-hexanol molar fractions.

Dispersion of the Photosensitizer 5,10,15,20-Tetrakis(4-Sulfonatophenyl)-porphyrin by the Amphiphilic Polymer Poly(vinylpirrolidone) in Highly Porous Solid Materials Designed for Photodynamic Therapy.

The ability of the amphiphilic and biocompatible poly(vinylpyrrolidone) to avoid self-aggregation of the photosensitizer 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin in aqueous solution in the presence of the biocompatible polycation chitosan, polymer that induces the dye self-aggregation, is shown. This is related to the tendency of the dye to undergo preferential solvation by the amphiphilic polymer. Importantly, the dispersant ability of this polymer is transferred to the solid state. Thus, aerogels made of the biocompatible polymers chitosan and chondroitin sulfate, and containing the photosensitizer dispersed by the amphiphilic polymer have been synthesized. Production of reactive oxygen species by the aerogel containing the amphiphilic polymer was faster than when the polymer was absent, correlating with the relative concentration of dyes dispersed as monomers. The aerogels presented here constitute low cost biocompatible materials bearing a conventional photosensitizer for photodynamic therapy, easy to produce, store, transport, and manage in clinical practice.

Water-Induced Phase Transition in Cyclohexane/n-Hexanol/Triton X-100 Mixtures at a Molar Composition of 1/16/74 Studied by NMR.

Molecular aggregation in a mixture of Triton X-100/n-hexanol/cyclohexane at a molar ratio of 1/16/74 is studied upon addition of small amounts of water. The composition of organic components has been chosen at a ratio n-hexanol/cyclohexane where a well-formed hydrogen bond network has been described. The ratio Triton X-100/n-hexanol has been chosen to afford a stoichiometry of ethylene oxide (EO) residues/n-hexanol of 1/2. At these conditions the addition of water consecutively produces the appearance of three defined phases: a clear solution, a lamellar phase, and a microemulsion. The two corresponding transitions occur at water/EO/n-hexanol molar ratios of 2/1/2 (clear to lamella), and 3/1/2 (lamella to microemulsion), while phase separation occurs at a molar ratio of 4/1/2, highlighting the important role of stoichiometry. Molecular dynamics measured by 1H NMR techniques, such as DOSY, and calculations of T1 and T2 relaxation times allow distinguishing the transition between the different phases and justifying their structure. Molecular assembly in the three phases is organized around hydrogen bond networks in which the hydroxyl groups of both TX-100 and n-hexanol, ethylene oxide groups of TX-100, and water participate. 1D 1H NMR spectral changes correlate with the different characteristics of the different phases. As the main characteristics of the lamellar phase we find a very restricted mobility of the molecules involved, and water chemical shifts in 1D 1H NMR spectra of around 5.0 ppm, higher than that of bulk water appearing at 4.7 ppm.

Facile Formation of Redox-Active Totally Organic Nanoparticles in Water by In Situ Reduction of Organic Precursors Stabilized through Aromatic-Aromatic Interactions by Aromatic Polyelectrolytes.

The formation of redox-active, totally organic nanoparticles in water is achieved following a strategy similar to that used to form metal nanoparticles. It is based on two fundamental concepts: i) complexation through aromatic-aromatic interactions of a water-soluble precursor aromatic molecule with polyelectrolytes bearing complementary charged aromatic rings, and ii) reduction of the precursor molecule to achieve stabilized nanoparticles. Thus, formazan nanoparticles are synthesized by reduction of a tetrazolium salt with ascorbic acid using polyelectrolytes bearing benzene sulfonate residues of high linear aromatic density, but cannot be formed in the presence of nonaromatic polyelectrolytes. The red colored nanoparticles are efficiently encapsulated in calcium alginate beads, showing macroscopic homogeneity. Bleaching kinetics with chlorine show linear rates on the order of tenths of milli-meters per minute. A linear behavior of the dependence of the rate of bleaching on the chlorine concentration is found, showing the potential of the nanoparticles for chlorine sensing.

Stability of Water/Poly(ethylene oxide)43-b-poly(ε-caprolactone)14/Cyclohexanone Emulsions Involves Water Exchange between the Core and the Bulk.

The formation of emulsions upon reverse self-association of the monodisperse amphiphilic block copolymer poly(ethylene oxide)43-b-poly(ε-caprolactone)14 in cyclohexanone is reported. Such emulsions are not formed in toluene, chloroform, or dichloromethane. We demonstrate by magnetic resonance spectroscopy the active role of the solvent on the stabilization of the emulsions. Cyclohexanone shows high affinity for both blocks, as predicted by the Hansen solubility parameters, so that the copolymer chains are fully dissolved as monomeric chains. In addition, the solvent is able to produce hydrogen bonding with water molecules. Water undergoes molecular exchange between water molecules associated with the polymer and water molecules associated with the solvent, dynamics of major importance for the stabilization of the emulsions. Association of polymeric chains forming reverse aggregates is induced by water over a concentration threshold of 5 wt %. Reverse copolymer aggregates show submicron average hydrodynamic diameters, as seen by dynamic light scattering, depending on the polymer and water concentration.

Effect of Polymer Micelles on Antifungal Activity of Geranylorcinol Compounds against Botrytis cinerea.

Herein, we explore the potential use of two micelle-forming block copolymers, i.e., Pluronic F-127 and poly(ethylene oxide)-b-poly(caprolactone), for application of fungicide agents. The polymer effect on the in vitro fungicide activity of a series of geranyl orcinol derivatives against Botrytis cinerea has been assessed. The results show that, for all test compounds, the incorporation into micelles, formed by Pluronic F-127, produces a great enhancement of the inhibitory effect on the growth of B. cinerea. For some compounds, at the lowest tested concentration (50 ppm), the percentage of inhibition increases significantly (from 0-10 to 80-90%) when the application is made using a polymer solution instead of an ethanol/water mixture. The synthesis and structural determination of a series of eight geranylphenols/diacetates, which were used as fungicide agents, are also discussed. These results suggest that polymer micelles are promising systems for application of crop-protecting agents.

Immobilization of hydrophilic low molecular-weight molecules in nanoparticles of chitosan/poly(sodium 4-styrenesulfonate) assisted by aromatic-aromatic interactions.

The immobilization of the hydrophilic low molecular-weight cationic molecules rhodamine 6G, methylene blue, and citidine in nanoparticles composed of two opposite charged polyelectrolytes, poly(sodium 4-styrenesulfonate) and chitosan, is studied, and the results correlated with their physicochemical properties. Nanoparticles containing both polyelectrolytes have been synthesized showing hydrodynamic diameters of around 200 nm and tunable zeta potential. It was found that the strength of binding of the cationic molecules to the polyanion bearing charged aromatic groups poly(sodium 4-styrenesulfonate) by means of short-range aromatic-aromatic interactions increases with their hydrophobicity and polarizability, as seen by (1)H NMR and UV-vis spectroscopies, and diafiltration. Consequently, association efficiencies of 45, 21, and 12% have been found for the three molecules, respectively, revealing the different ability of the molecules to be immobilized in the nanoparticles. These results provide a proof of concept on a new strategy of immobilization of hydrophilic low molecular-weight molecules based on aromatic-aromatic interactions between polyelectrolytes and their aromatic counterions.

Polyaromatic-anion behavior of different polyelectrolytes containing benzenecarboxylate units.

The polyaromatic-ion behavior of poly(sodium N-maleoyl-2-aminobenzoate-co-sodium acrylate) in a comonomer composition 1:2, poly(sodium N-maleoyl-4-aminobenzoate-co-sodium acrylate) in a comonomer composition 1:2, and poly(sodium N-maleoyl-4-aminobenzoate-co-N,N-dimethylacrylamide) in a comonomer composition 1:1 is studied. The copolymers undergo short-range aromatic-aromatic interactions with methylene blue and rhodamine B, as a consequence of which their UV-vis monomer band is shifted to lower energies. As a result of their polyaromatic-anion behavior, methylene blue is easily dispersed on the polymeric domains. Moreover, the pK(a) of rhodamine B is shifted from 3.2 to 4.5-5 in the presence of these copolymers. This behavior is also observed in the presence poly(sodium 4-styrenesulfonate), but not in the presence of poly(sodium vinyl sulfonate), which are taken as reference polymers. Compared with poly(sodium 4-styrenesulfonate), a lower resistance to the cleaving effect of added NaCl on the interaction with methylene blue is found. A different influence on the reduction of 2,3,5-triphenyl-2H-tetrazolium chloride with ascorbic acid was found for the different polyelectrolytes.